Goldwind power transport-manufacture,factory,supplier from China

Carrist Blade LifterThe Carrist Technology Co.,Ltd is one of the leading full-range manufacturers of special vehicles for heavy load transport special transport and wind power transport, wind turbine blade lifter. The semi-trailers, low-loaders, modular vehicles and self-propelled vehicles that we produce can be used to transport anything exceptionally heavy, long, wide or tall! Our customers value our reliability and flexibility in offering tailored transport solutions even in the face of difficult challenges.

Carrist welding equipment of spot welding robot adopts integrated welding tongs, and the welding transformer is installed behind the welding tongs, so the transformer must be as small as possible. For transformers with small capacity, 50Hz power frequency AC can be used, while for transformers with large capacity, inverter technology has been used to change 50Hz power frequency AC into 600-700Hz AC, reducing and reducing the volume of the transformer.

Carrist Blade Adapter Rotor blades for wind power plants frequently present haulage companies with a difficult task. Especially when dealing with the “last mile”, the transport is often more difficult particularly when tight corners or obstacles have to be negotiated. It is for precisely these situations that the new adapter generation from CARRIST provides the right solution to avoid obstacles such as trees or buildings with the rotor blades even more effectively.

Carrist wind tower trailer consists of a frame, walking mechanism, lifting tool, and some distance off manipulate operation field.The body adopts more than one arc beams to raise the wind tower system to lessen the center of gravity of the automobile body; the lifting device adopts a hydraulic gadget to regulate the pinnacle of the body loaded with the wind tower within the direction of transportation, that need to decorate the stability of the auto body.The walking mechanism consists of the axle and the hydraulic guidance machine established on the axle.

Here are the detailed specifications of Carrist HVLS Fans:Blade diameter: Ranges from 16 feet to 24 feet.Motor power: The Fans are powered by a three-phase motor with power ranging from 1.5 kW to 2.2 kW, depending on the blade diameter.RPM (Revolutions Per Minute): The Fans operate at 40 RPM.Airflow: The Fans can move up to 420,000 cubic feet per minute (CFM), depending on the blade diameter.Noise level: The Fans operate at a noise level of around 60 dB, which is barely audible and does not cause any disturbance.Control options: The Fans can be controlled manually or using a remote control, an

Carrist welding device of spot welding robotic adopts blanketed welding tongs, and the welding transformer is mounted at the back of the welding tongs, so the transformer must be as small as viable. for transformers with small capacity, 50hz power frequency ac may be used, even as for transformers with huge capability, inverter technology has been used to trade 50hz strength frequency ac into 600-700hz ac, reducing and lowering the quantity of the transformer.

Size: Carrist industrial ceiling fans are available in various sizes, typically ranging from 48 inches to 96 inches in diameter.Motor Power: The motor power of Carrist industrial ceiling fans typically ranges from 100 watts to 500 watts, depending on the size and model.Airflow: Carrist industrial ceiling fans are designed to provide high airflow, with airflow ratings ranging from 10,000 CFM (cubic feet per minute) to 50,000 CFM.Speed Settings: These fans usually offer multiple speed settings, allowing you to adjust the fan speed according to your preferences and requirements.Mounting Options:

Carrist wind power blade trailer For transporting extremly heavy and long windmill turbine blade - Wind Turbine Blade Trailer from carrist is the ideal solution, with single to triple extendable decks and a loading length of up to 56 meters.Carrist Wind Turbine Blade Trailer adapts perfectly to haul 45 meters to 80 meters long windmill turbine blade transportation and long bulky goods.carrist Wind Turbine Blade Trailer are noted for their highly robust frames and outstanding stability of the extension beam.

Carrist Blade LifterThe Carrist Technology Co.,Ltd is one of the leading full-range manufacturers of special vehicles for heavy load transport special transport and wind power transport, wind turbine blade lifter. The semi-trailers, low-loaders, modular vehicles and self-propelled vehicles that we produce can be used to transport anything exceptionally heavy, long, wide or tall! Our customers value our reliability and flexibility in offering tailored transport solutions even in the face of difficult challenges.

Carrist Blade LifterThe Carrist Technology Co.,Ltd is one of the leading full-range manufacturers of special vehicles for heavy load transport special transport and wind power transport, wind turbine blade lifter. The semi-trailers, low-loaders, modular vehicles and self-propelled vehicles that we produce can be used to transport anything exceptionally heavy, long, wide or tall! Our customers value our reliability and flexibility in offering tailored transport solutions even in the face of difficult challenges.

Carrist compressed rubbish truck Rubbish Collection Kitchen Garbage Transport Truck consists of sealed rubbish bin, hydraulic machine and running device. the whole automobile is completely sealed. the sewage in the method of self-compression, self-dumping and compression enters the sewage tank, which absolutely solves the hassle of secondary pollution in the technique of garbage transportation and avoids inconvenience to human beings. the key components are imported additives, that have the benefits of excessive strain, top sealing, handy operation and protection.

Carrist wind turbine transport trailerThe suspension of the telescopic trailer adopts mechanical suspension, the mechanical suspension can accept overload. it could be air suspension and mechanical suspension. the air suspension is the balance ability cause it has automatic lifting distance. The Telescopic Trailer for Windmill Blade could have three steering modes.

• Carrist Blade Lifter could make the wind blade lift,during wind blade transportation, leveling and rotate itself to avoid various obstacles such as trees, mountains and wires, and effectively solve the problem of wind power blade transportation in mountainous areas.  • The blade is directly fix to the blade lifter and lifted in midair to transport the super long blade with a short total length of trailer.

5 Axles Low-bed Semi-trailerLow flatbed semi-trailers are generally used to transport heavy automobiles (along with tractors, buses, special cars, and many others.), rail motors, mining machinery, forestry equipment, production machinery (including excavators, bulldozers, loaders, road pavers, cranes, and so on.) ) and different heavy masses, the decrease the middle of gravity, the higher the stability and safety, and the extra the ability to move incredible high hundreds and bypass overhead limitations. Tell me your demand, we recommend suitable trailer professionally.

The design of the SMPT flat car designed by CARRIST is also very ingenious, that is its hydraulic system. The components of the hydraulic system are power components, executive components, control components, auxiliary components and hydraulic oil. The hydraulic system of the vehicle can change its force through the pressure. According to the different functions, the hydraulic system can also be divided into hydraulic transmission system and hydraulic control system. In addition, the lifting adjustment of SMPT flat car is also very important.

•Carrist wind tower trailer is a telescopic increase low bed trailer specially used to transport wind towers. the wind tower may be located on the platform thru the extendable growth to facilitate long-distance transportation. in comparison with traditional transportation, carrist wind tower trailer has the benefits of fast speed and excessive balance.  •Carrist axle is specifically designed, which successfully reduces the floor clearance of the trailer platform.

The specifications of the Carrist Lowbed Semi Trailer may vary depending on the specific model and customization options. However, here are some common specifications you may find:Dimensions:Length: Typically ranging from 10 meters to 18 meters.Width: Varies, but common widths are around 2.5 meters to 3 meters.Height: Usually between 1.3 meters to 1.5 meters.Load Capacity:The load capacity can vary depending on the trailer's design and axle configuration.

CARRIST VEHICLE :The basic structure of the bridge beam transport vehicle is to bridge the beam frame for load on the front and rear separated transport modules. The transport object is "lifted" by the beam frame in the air, and the load is transferred to the front and rear multi-axle transport modules through the base of the beam frame, so as to realize load sharing.

UseOther TrailersOE NO.semi trailer with side wallMax Payload160TSize15000mm*2990m*1070+310-290mmPlace of OriginShandong, ChinaBrand NameCarrist VehicleAxleJulin  Or ΣSuspensionHydraulic suspension three-point   supportKing Pin2 " or 3.5" traction pinWheel rim6.5-15Lines and axles6lins 12 axlesWheel base1800mmTire56 PCS 7.5R15(double coin)Brake systemDual pipeline control double shoe   acting on all the wheelsMain framePlat concave frame ultra-low dockWeldingSubmerged arc welding .manul welding   and gas yield welding

Carrist girder bridge to transport weight focused shipment in particular big transformer. it may bolsters to distribute extraordinary weight to hydraulic modular trailer and use the girder bridge to decrease visiting top, permit outsized cargo to pass thru beneath bridges and tunnels in order that the shipping activity may be legal with the aid of road government. the trailer collectively with the girder, we name it a heavy haul trailer or girder trailer.

Wind Turbine Blade Transport Trailer Wind turbine blade trailer ctb collection key capabilities•the telescopic growth may be 1-three in alternative, the max duration will up to 75m•Go along with excessive grade of metal which makes on the booms, so can make the trailer lightweight in tare weight•Go together with hydraulic forcing steering and integrated powerful strength %, that may make the steerage perspective to above 50 degree•One-of-a-kind type manner of smart layout on blade lifter wind turbine so can hold the loading platform in a low position•Use durable axle and suspension with t

Carrist Wind Tower Trailer is specially designed, which effectively reduces the ground clearance of the trailer platform. The increased carrying capacity of the carrist wind tower trailer can load objects with a larger diameter, especially through wind power transportation. Wind tower transportation is an ideal transportation tool suitable for transporting wind tower and large-diameter goods.

Introduction Girder Bridge TrailerThe basic structure of the Girder Bridge Trailer is to bridge the beam frame for the load on the front and rear separated transport modules. The transport objects are "lifted" by the beam, and the load is transmitted to the front and rear multi-axle transport modules through the base of the beam frame, so as to realize load sharing.

The specifications of a wind turbine blade lifter can vary depending on several factors, such as the size and weight of the wind turbine blades to be lifted and installed, the height of the wind turbine tower, and the specific requirements of the construction project.