Gold wind Blade Lifter Trailer-manufacture,factory,supplier from China

• Carrist Blade Lifter could make the wind blade lift,during wind blade transportation, leveling and rotate itself to avoid various obstacles such as trees, mountains and wires, and effectively solve the problem of wind power blade transportation in mountainous areas.  • The blade is directly fix to the blade lifter and lifted in midair to transport the super long blade with a short total length of trailer.

Wind Blade Lifter Carrist Rotor blades for wind strength flora regularly existing haulage businesses with a challenging task. Especially when dealing with the “last mile”, the transport is frequently extra hard specifically when tight corners or barriers have to be negotiated.

Another key advantage of Carrist Vehicle's Wind Turbine Blade Lifter is its efficiency in terms of time and cost savings. The lifter significantly reduces the time required for blade transportation, optimizing project timelines and boosting overall productivity. By minimizing the need for manual labor and additional equipment, this product effectively cuts down costs and increases project profitability.Additionally, the Wind Turbine Blade Lifter ensures ease of operation and minimal maintenance requirements.

Wind Turbine Blade Lifter throughout the transportation, that could lessen the trailing location of the blades, significantly reduce the amount of street reconstruction paintings, shorten the road reconstruction duration, and meet the shortage of turning radius to a certain volume avoiding boundaries including high mountains and cliffs, building organizations, energy poles and house demolition also can notably reduce the overall length of blade delivery automobile body, thus being promoted and applied.

CARRIST windmill rotor blade lifter 9th-generation rotor blade adapter that is mounted on modular trailer. CARRIST 9th-generation Rotor blade adapter for transport rotor blade, wind blades.

Carrist wind turbine blade lifter refers to a wind blade transport vehicle equipped with a hydraulic lifting device, mainly aimed at the problem of wind blade transportation in mountainous areas. When the road is straight, the wind blade is transported horizontally. When encountering extremely small turning radii in mountainous areas, the lifting device is used to rotate the wind blades and shorten the length of the entire vehicle to bypass obstacles and pass through the curve.

Carrist Blade LifterThe Carrist Technology Co.,Ltd is one of the leading full-range manufacturers of special vehicles for heavy load transport special transport and wind power transport, wind turbine blade lifter. The semi-trailers, low-loaders, modular vehicles and self-propelled vehicles that we produce can be used to transport anything exceptionally heavy, long, wide or tall! Our customers value our reliability and flexibility in offering tailored transport solutions even in the face of difficult challenges.

The specifications of a wind turbine blade lifter can vary depending on several factors, such as the size and weight of the wind turbine blades to be lifted and installed, the height of the wind turbine tower, and the specific requirements of the construction project.

Number of Axle-line(n)23456Speed(km/h)580580580580580Total weight(t)6832.810249.213665.61708220498.4Rated Payload(t)6125.891.538.7122.852.4152.564.518377.4Dead Weight(t)710.513.217.521Load Per Axle Line(t)3416.43416.43416.43416.43416.4Total Length(mm)30004500600075009000Total Width(mm)3000Height(mm)1175±300Axle Distance(mm)1500Wheels Distance(mm)1800Tyre Specification215/75R17.5Rim Specification6.00-17.5Number of Tyre1624324048Max.Turning Angle of Wheel55°Min.Turning Radius(mm)inner 450inner 1500inner 2600inner 1500inner 2000outer 4070outer 5800outer 7600outer 5800outer 6700

Carrist Blade LifterThe Carrist Technology Co.,Ltd is one of the leading full-range manufacturers of special vehicles for heavy load transport special transport and wind power transport, wind turbine blade lifter. The semi-trailers, low-loaders, modular vehicles and self-propelled vehicles that we produce can be used to transport anything exceptionally heavy, long, wide or tall! Our customers value our reliability and flexibility in offering tailored transport solutions even in the face of difficult challenges.

The Carrist wind turbine blade lifter trailer is a reliable and efficient solution for the transportation and installation of wind turbine blades. Its innovative design ensures that blades are transported safely, reducing the risk of damage and shortening the installation time. It is a cost-effective solution that provides a high level of safety and efficiency while meeting the needs of wind turbine installation projects of various types and sizes.

The ftv 850 has been released as the “huge brother” to the famous  carrist goldhofer ftv 550. depending at the task handy, a extensive variety of alternatives is available with adapters for various parallel combinations. this makes the ftv 850 best for transporting more-long rotor blades for turbines on web sites with low wind speeds, stated goldhofer.The new ftv 850 is goldhofer’s brand new addition to its portfolio of devoted merchandise for rotor blade transportation.

In recent years, the construction of wind farms in mountainous areas has been carried out on a large scale, with significant deviations in road transportation conditions compared to other onshore wind farms, and the construction cost has significantly increased. Mountain wind farms are generally located in remote areas, with scattered wind turbines and poor terrain conditions, and the vast majority of their locations require new roads to connect.

Specification:Brand: Carrist Rotor Blade Adapter Mounted on Modular TrailerDimension: 19712mm*3000mm*5000mmApplicable blade: 56-80m, 121-156 model windmill bladesAxis-line: 10 unitsMax rotation angle: 360°Lifting cylinder: cylinder diameter 280mm Lift angle 0-55Gooseneck with an active platform: 1mHydraulic station: 31KW four-cylinder diesel engineLanding gear: Front and rear hydraulic support cylinderKing pin: 2.00 or 3.5 inch bolt-in king pinPoints to note in operation:1.

Wind Blade Trailer carrist wind turbine blade trailer suspension kind includes leaf spring suspension, hydraulic suspension, and airbag suspension let's introduce to you:  •the leaf spring blade trailer is relatively similar to the semi-low loader, but its chassis adopts the field design. the chassis adjusts the trailer length through pulling to evolve to the wind blade shipping of various lengths.

Wind Turbine Blade Transport Trailer Wind turbine blade trailer ctb collection key capabilities•the telescopic growth may be 1-three in alternative, the max duration will up to 75m•Go along with excessive grade of metal which makes on the booms, so can make the trailer lightweight in tare weight•Go together with hydraulic forcing steering and integrated powerful strength %, that may make the steerage perspective to above 50 degree•One-of-a-kind type manner of smart layout on blade lifter wind turbine so can hold the loading platform in a low position•Use durable axle and suspension with t

Carrist windmill turbine lifter Rotor blades are touchy and extraordinarily long, with a vogue closer to ever large installations. Rotor blade lengths of up to eighty meters are now not exotic anymore. They can be transported in more than a few methods with cars via CARRIST.Telescopic Extendable Windmill Turbine Blade Trailer are a stable and low-budget answer for handy route sections.

Carrist Wind Turbine Blade Trailer wind turbine blade trailer suspension kind consists of leaf spring suspension, hydraulic suspension, and airbag suspension allow's introduce to you:  •the leaf spring blade trailer is truly similar to the semi-low loader, but its chassis adopts the container design. the chassis adjusts the trailer length via pulling to adapt to the wind blade shipping of different lengths.

Wind Turbine Blade Trailer is specially designed, which successfully reduces the ground clearance of the trailer platform. the expanded carrying capability of the carrist wind tower trailer can load devices with a larger diameter, particularly thru wind strength transportation. wind tower transportation is a high-quality transportation device suitable for transporting wind tower and big-diameter objects.

Carrist Blade LifterThe Carrist Technology Co.,Ltd is one of the leading full-range manufacturers of special vehicles for heavy load transport special transport and wind power transport, wind turbine blade lifter. The semi-trailers, low-loaders, modular vehicles and self-propelled vehicles that we produce can be used to transport anything exceptionally heavy, long, wide or tall! Our customers value our reliability and flexibility in offering tailored transport solutions even in the face of difficult challenges.

Wind blade adapter carrist blade adapter 01 especially designed for the complicated street transportation of wind turbine blades can enhance the blades by using hydraulic manage and rotate 360 tiers to keep away from numerous constraints (mountain slopes, bushes, homes, bridges, tunnels, and many others.) for the duration of the transportation, that can reduce the trailing place of the blades, significantly reduce the quantity of road reconstruction paintings, shorten the street reconstruction duration, and meet the lack of turning radius to a positive quantity keeping off obstacles at the sid

Carrist wind power blade trailer For transporting extremly heavy and long windmill turbine blade - Wind Turbine Blade Trailer from carrist is the ideal solution, with single to triple extendable decks and a loading length of up to 56 meters.Carrist Wind Turbine Blade Trailer adapts perfectly to haul 45 meters to 80 meters long windmill turbine blade transportation and long bulky goods.carrist Wind Turbine Blade Trailer are noted for their highly robust frames and outstanding stability of the extension beam.

Specification:Brand: Carrist Wind Blade Adapter with Modular TrailerDimension: 19500mm*3400mm*4650mmApplicable blade: 56.5m-76mAxle: 4 lines 8 axlesTires: 32 unitsMax rotation angle: 360°Lifting cylinder: cylinder diameter 280mm Lift angle 0-55Gooseneck with an active platform: 1mHydraulic station: 31KW four-cylinder diesel engineLanding gear: Front and rear hydraulic support cylinderKing pin: 2.00 or 3.5 inch bolt-in king pinStructures:The main components of the blade adapter includes Rotation platform, Blade circle holder, Lifting cylinders, Operation seats and valves, Low bed trailers.Rotat

CARRIST's windmill blade adaptor is a precision-engineered product designed to enable the fitting of contemporary wind turbine blades onto older wind turbines from various manufacturers.