blade transporter-manufacture,factory,supplier from China

Girder transporter's wheels are powered by hydraulic motors and steering is by means of hydraulic cylinder, driver cabin and wireless control system is provided. Safety features are always main consideration of our company. Limit switch, emergency break switch at varies location, sensors, auto alignment system etc.

Girder Transporter Bridge Beam Trailer's miles very handy and safe to load and sell off items on the bridge girder transporter. some kinds can be found out via their own capabilities with out the assistance of lifting equipment; further, the split shipping vehicle shape is likewise very flexible. even if the overall period of the frame may be very lengthy, it is not tough to turn at huge angles.Specification of Girder Transporter Bridge Beam TrailerDetails of Girder Transporter Bridge Beam Trailer

The loading and unloading of goods by Girder Bridge Trailer are very convenient and safe, and some types can be realized by their own functions without the assistance of lifting equipment; In addition, the steering structure of the split transport vehicle is also very flexible. Even if the total length of the vehicle is very long, it is not laborious when turning at a large angle.Specification of 600tons Girder Bridge TransporterWorkshop of 600tons Girder Bridge Transporter

Specification:Logo: carrist rotor blade adapter set up on modular trailerMeasurement: 19712mm*3000mm*5000mmRelevant blade: 56-80m, 121-156 version windmill bladesAxis-line: 10 gadgetsMax rotation perspective: 360°Lifting cylinder: cylinder diameter 280mm raise attitude zero-55Gooseneck with an lively platform: 1mHydraulic station: 31kw four-cylinder diesel engineLanding equipment: front and rear hydraulic support cylinderKing pin: 2.00 or 3.five inch bolt-in king pinPoints to note in operation:1.

• Carrist Self Propelled Trailer is mainly used for the transportation of ODC cargo. Its advantages are flexible use, convenient loading and unloading, and high load capacity. Self propelled modular trailer is widely used in petroleum, chemical industry, offshore, construction and other engineering fields.

Specification:Brand: Carrist Rotor Blade Adapter Mounted on Modular TrailerDimension: 19712mm*3000mm*5000mmApplicable blade: 56-80m, 121-156 model windmill bladesAxis-line: 10 unitsMax rotation angle: 360°Lifting cylinder: cylinder diameter 280mm Lift angle 0-55Gooseneck with an active platform: 1mHydraulic station: 31KW four-cylinder diesel engineLanding gear: Front and rear hydraulic support cylinderKing pin: 2.00 or 3.5 inch bolt-in king pinPoints to note in operation:1.

Main specification of Windmill Rotor Blade Adapter, Wind Blade Lifter:Angle of inclination up to 60°Max. rotation angle of the rotor blade +-110°Maximum stability due to a hydraulically-operated, sliding counterweight in longitudinal and horizontal directions depending on the rotor blade positionOperating temperature – 20 °C up to + 40 °CRadio remote control with display of wind speed, transverse gradient, blade position, ballast positionDetail of Blade Adapter

• Carrist Blade Lifter could make the wind blade lift,during wind blade transportation, leveling and rotate itself to avoid various obstacles such as trees, mountains and wires, and effectively solve the problem of wind power blade transportation in mountainous areas.  • The blade is directly fix to the blade lifter and lifted in midair to transport the super long blade with a short total length of trailer.

Carrist multi axle trailer for blade1. The general extendable wind blade transport trailer is a bit similar to the lowbed transporter, but its girder adopts a buckle box type design, and the girder is pulled to adjust the length of the vehicle to adapt to the transportation of wind blades of different lengths.2. The extendable trailer has flat, concave beam, tire leaking and pull-out structures. The frame is stepped and the longitudinal beam section is I-shaped, which has the characteristics of high rigidity and high strength.3.

Principal specification of Windmill Rotor Blade Adapter, Wind Blade Lifter:Angle of inclination up to 60°Max.

Windmill Rotor Blade AdapterRotor blades are sensitive and extremely long, with a trend towards ever larger installations. Rotor blade lengths of up to 80 meters are not uncommon anymore. They can be transported in various ways with vehicles by Carrist.Telescopic Extendable Windmill Turbin Blade Trailer are a solid and economical solution for easy route sections. When space is limited, we can rely on the rotor-blade adapters by Carrist.

CARRIST's windmill blade adaptor is a precision-engineered product designed to enable the fitting of contemporary wind turbine blades onto older wind turbines from various manufacturers.

Windmill rotor blade adapter carrist ninth-technology rotor blade adapter that is established on modular trailer. carrist 9th-generation rotor blade adapter for shipping rotor blade, wind blades.

The ftv 850 has been released as the “huge brother” to the famous  carrist goldhofer ftv 550. depending at the task handy, a extensive variety of alternatives is available with adapters for various parallel combinations. this makes the ftv 850 best for transporting more-long rotor blades for turbines on web sites with low wind speeds, stated goldhofer.The new ftv 850 is goldhofer’s brand new addition to its portfolio of devoted merchandise for rotor blade transportation.

Another key advantage of Carrist Vehicle's Wind Turbine Blade Lifter is its efficiency in terms of time and cost savings. The lifter significantly reduces the time required for blade transportation, optimizing project timelines and boosting overall productivity. By minimizing the need for manual labor and additional equipment, this product effectively cuts down costs and increases project profitability.Additionally, the Wind Turbine Blade Lifter ensures ease of operation and minimal maintenance requirements.

Specification:Brand: CARRIST Wind Blade Adapter with Modular TrailerDimension: 19500mm*3400mm*4650mmApplicable blade: 56.5m-76mAxle: 4 lines 8 axlesTires: 32 unitsMax rotation angle: 360°Lifting cylinder: cylinder diameter 280mm Lift angle 0-55Gooseneck with an active platform: 1mHydraulic station: 31KW four-cylinder diesel engineLanding gear: Front and rear hydraulic support cylinderKing pin: 2.00 or 3.5 inch bolt-in king pinStructures:The main components of the blade adapter includes Rotation platform, Blade circle holder, Lifting cylinders, Operation seats and valves, Low bed trailers.Rotat

CARRIST windmill rotor blade lifter 9th-generation rotor blade adapter that is mounted on modular trailer. CARRIST 9th-generation Rotor blade adapter for transport rotor blade, wind blades.

Specification:Brand: Carrist Wind Blade Adapter with Modular TrailerDimension: 19500mm*3400mm*4650mmApplicable blade: 56.5m-76mAxle: 4 lines 8 axlesTires: 32 unitsMax rotation angle: 360°Lifting cylinder: cylinder diameter 280mm Lift angle 0-55Gooseneck with an active platform: 1mHydraulic station: 31KW four-cylinder diesel engineLanding gear: Front and rear hydraulic support cylinderKing pin: 2.00 or 3.5 inch bolt-in king pinStructures:The main components of the blade adapter includes Rotation platform, Blade circle holder, Lifting cylinders, Operation seats and valves, Low bed trailers.Rotat

Specification:Brand: Carrist Wind Blade Adapter with Modular TrailerDimension: 16250mm*3700mm*5000mmApplicable blade: 80m, 121-156 model windmill bladesLoading capacity: 23.5 TonsAxle: 3 lines 6 axlesTires: 24 unitsMax rotation angle: 360°Lifting cylinder: cylinder diameter 280mm Lift angle 0-55Gooseneck with an active platform: 1mHydraulic station: 31KW four-cylinder diesel engineLanding gear: Front and rear hydraulic support cylinderKing pin: 2.00 or 3.5 inch bolt-in king pin  Features:1. Max rotation angle of the rotor blade 360°2.

Specification:Brand: Carrist Rotor Blade Adapter Mounted on Modular TrailerDimension: 19712mm*3000mm*5000mmApplicable blade: 56-80m, 121-156 model windmill bladesAxis-line: 10 unitsMax rotation angle: 360°Lifting cylinder: cylinder diameter 280mm Lift angle 0-55Gooseneck with an active platform: 1mHydraulic station: 31KW four-cylinder diesel engineLanding gear: Front and rear hydraulic support cylinderKing pin: 2.00 or 3.5 inch bolt-in king pinPoints to note in operation:1.

Specification:Brand: Carrist Wind Blade Adapter with Modular TrailerDimension: 16250mm*3700mm*5000mmApplicable blade: 80m, 121-156 model windmill bladesLoading capacity: 23.5 TonsAxle: 3 lines 6 axlesTires: 24 unitsMax rotation angle: 360°Lifting cylinder: cylinder diameter 280mm Lift angle 0-55Gooseneck with an active platform: 1mHydraulic station: 31KW four-cylinder diesel engineLanding gear: Front and rear hydraulic support cylinderKing pin: 2.00 or 3.5 inch bolt-in king pin  Features:1. Max rotation angle of the rotor blade 360°2.

Wind Turbine Blade Adapter Carrist Rotor blades are touchy and extraordinarily long, with a vogue nearer to ever large installations. rotor blade lengths of up to eighty meters don't seem to be individual anymore.

Carrist Blade LifterThe Carrist Technology Co.,Ltd is one of the leading full-range manufacturers of special vehicles for heavy load transport special transport and wind power transport, wind turbine blade lifter. The semi-trailers, low-loaders, modular vehicles and self-propelled vehicles that we produce can be used to transport anything exceptionally heavy, long, wide or tall! Our customers value our reliability and flexibility in offering tailored transport solutions even in the face of difficult challenges.

Specification:Brand: Carrist Rotor Blade Adapter Mounted on Modular TrailerDimension: 19712mm*3000mm*5000mmApplicable blade: 56-80m, 121-156 model windmill bladesAxis-line: 10 unitsMax rotation angle: 360°Lifting cylinder: cylinder diameter 280mm Lift angle 0-55Gooseneck with an active platform: 1mHydraulic station: 31KW four-cylinder diesel engineLanding gear: Front and rear hydraulic support cylinderKing pin: 2.00 or 3.5 inch bolt-in king pinPoints to note in operation:1.