3X6 Wind Turbine Blade Adapter With Modular Trailer-manufacture,factory,supplier from China

In the wind power industry, CARRIST vehicle mainly have wind power nacelle, wind turbine blades, wind tower section, etc. to complete industrial chain. CARRIST vehicle provide all types transportation solutions for the wide power industry use.Comparing with extendable wind blade trailer ,The rotor wind blade adapter can raise, swing, and rotate the blades. It can avoid various obstacles such as trees, mountains, and wires on the way, effectively solve the problem of wind blade transportation in mountain areas, and directly grasp the wind blades by the hydraulic power station.

Windmill Rotor Blade Adapter main specification:Angle of inclination up to 60°Max. rotation angle of the rotor blade +-110°Maximum stability due to a hydraulically-operated, sliding counterweight in longitudinal and horizontal directions depending on the rotor blade positionOperating temperature – 20 °C up to + 40 °CRadio remote control with display of wind speed, transverse gradient, blade position, ballast position

The cost reduction of global wind power has been significant, with the lowest cost of land wind energy. In 2021, the average LCOE of European sea wind reached 0.455 yuan/KW, and the average LCOE of land wind reached 0.294 yuan/KW. The LCOE of Chinese sea breeze is lower than that of Japan and South Korea. In 2021, the average LCOE of Chinese land breeze reached 0.196 yuan/KW, which has already benchmark against the international leading level. With the updating and iteration of technology, it is expected that the cost of land wind will be lower in the future.

        According to Wenzhou Daily, the global offshore wind power headquarters and final assembly base (Phase I) have recently officially started construction in this area.      It is reported that the total investment of this project is about 1 billion yuan, with a total land area of about 100 acres. It mainly produces 500 typhoon power generation protection and control devices and equipment, with an annual output of over 200 9MW to 20MW large megawatt wind turbines.

                        At the noon of April 13, at the foot of Tianshan Mountain, 4000 kilometers away from Hangzhou, Zhejiang Province, the first wind turbine of the 50 MW wind power project of Zhejiang Energy Bole City, located in Santai District, Bole City, Bortala Mongols Autonomous Prefecture, Xinjiang, slowly lifted off with a weight of about 71 tons.

ItemTechnical Parameters of Nicolas MDED model modular trailerCapacity34000 kg/axle line @0.5km/hMaterialHG60 high tensile steelDead weight3300 kg/axle lineWidth of Platform2990 mmPlatform height1080(+290)(-310) mm. Total suspension stroke 600 mmWheelbase1550 mmTire specification215/75 R17.5Rim specification6.00 – 17.5 (10 holes)Approach / Departure angle20° / 26°Steering mechanismHydraulic – Mechanic all-wheel steeringBrake systemDual pipeline control.

        From July to September 2023, the Hebei Construction Investment Kangbao "Replacing Small with Large" Wind Power Parity Demonstration Project continuously announced the bidding results for the procurement of wind turbine equipment and auxiliary equipment, as well as pre installed substation equipment. Due to the use of grid type wind turbines in 30000 kilowatts of the total installed capacity of 200000 kilowatts, it became the first project to achieve mass commercialization of grid type units.

        On October 17th, the 2023 Beijing International Wind Energy Conference and Exhibition (CWP2023) was grandly held in Beijing. As one of the top five wind turbine manufacturers in China and the top ten globally, Sany Heavy Energy Co., Ltd. (hereinafter referred to as Sany Heavy Energy), with the theme of "15 years · More Reliable", attended the industry event with nearly 1000 exhibitors from more than 30 countries and regions around the world, including Denmark, Norway, and Germany.

On November 23, 2022, the 16MW offshore wind turbine developed by Goldwind Technology in collaboration with Three Gorges Group was successfully taken offline in the Fujian Three Gorges Offshore Wind Power International Industrial Park, becoming the wind turbine with the largest impeller diameter, largest single unit capacity, and lightest weight per megawatt in the world at that time.At the beginning of this year, led by China Shipbuilding Group and independently developed by China National Offshore Engineering Corporation, the H260-18MW offshore wind turbine was successfully developed in the

With the vigorous development of the wind power industry, wind power accidents have also occurred frequently.On July 22nd, a video was uploaded on the official account of Shandong Radio and Television Station's TV Life Channel, showing that a large truck in Songyuan City, Jilin Province had its body "peeled" off by wind turbine blades during transportationSimilar incidents are not uncommon. A few days ago, a sudden accident occurred on the G302 National Highway in Baicheng City, Jilin Province, where a large vehicle "heavy object" rolled down and smashed the vehicle.